Dress up the air box of your BMW R nineT with this pair of side covers by FCR Original. Openwork aluminium, black finish, tailor-made for a precise fit. Fitted in minutes with the original screw, no drilling.
The BMW R nineT plays the neo-retro card, and its flanks fully take part in that allure. To dress the air box area, our builders designed this pair of side covers in our FCR Original workshop, in replacement of the original covers.
The drawing is an FCR Original signature. The covers take up clean lines, punctuated by slots that recall the mechanical spirit and add relief to the flank of the bike. Left and right, they assert the character of the R nineT without overloading its silhouette.
Made of aluminium and finished in deep black, these covers dress and protect the air box area. Their formed sheet follows the flank of the bike and shields it from spray and external elements, while keeping a clean allure over time.
The fitting is one of their great strengths. Each cover fixes by reusing the original screw: you simply remove the original cover and put ours in its place, with no complex tooling or drilling. The operation is done in a few minutes, and stays fully reversible should you want to return to the standard configuration.
These covers are tailor-made for the R nineT, with a part dedicated to the left side and one to the right side. This precise fit guarantees a clean integration, with no play or approximation, faithful to the demand we put into each of our parts.
Each pair of side covers is designed, inspected and packed in our FCR Original workshop, in Chauvigny. Born of our premium build practice, this part is conceived by our builders with the same care given to our exceptional motorcycles. It is this demand, from the drawing to the parcel, that signs an FCR Original part.
A question about compatibility with your R nineT or about fitting the covers? Our team is at your service at 05 49 62 03 26.
Each order is prepared with the utmost care in our workshop in France.
Shipping within 24/48 working hours, with secure packaging to protect your parts.
Delivery France 🇫🇷: 2 to 4 working days via premium carriers (Colissimo, Mondial Relay, Fedex or UPS).
Delivery Europe & International 🌎: 3 to 7 working days with real-time tracking.
A personalized tracking email is sent to you as soon as your order is shipped.
Complete your nineT build
Choose options
These covers dress the air box area with an openwork design signed FCR Original. They reinforce the neo-retro allure of your R nineT without weighing down its line.
Each cover fixes with the original screw, with no drilling or complex tooling. Installation is quick and fully reversible.
Conceived by our FCR Original builders, these covers are tailor-made for the R nineT. From design to finish, everything is mastered in our French workshop in Chauvigny.
Video
Before / After
Each FCR Accessoires creation brings a touch of character and exclusivity to your BMW nineT .
A refined design, noble materials and 100% French manufacturing.
Before
After
Compatible with: BMW R NineT / Pure / Scrambler / Urban GS from 2021
Installation without modification: Parts designed to fit your original motorcycle model.
Complete delivery: Detailed installation manual and mounting hardware included.
Motorcycle side covers dress and protect the flanks of the bike, in particular the air box or battery area. They are visible parts that strongly contribute to the look of the machine, especially on neo-retro bikes where the frame and the mechanics are exposed. Replacing them with covers of a worked design lets you personalise the look of the bike and, depending on the model, better protect the elements behind. The quality of the material and the precision of the fit make the difference between a generic cover and a workshop part. Our FCR Original side covers for the BMW R nineT illustrate this approach.
Yes, in most cases motorcycle side covers can be replaced yourself, as they usually fix onto existing points and hardware. The operation most often consists of removing the original cover, then putting the new one in its place. When the replacement cover reuses the original screw and requires no drilling, installation takes only a few minutes and stays within reach of a careful owner. Our FCR Original side covers for the BMW R nineT fit precisely with the original hardware, with no complex tooling.
Yes, these side covers are designed for the BMW R nineT and fit in place of the original air box covers. They are sold as a pair, with a part dedicated to the left side and one to the right side. If in doubt about your model or year, our team checks compatibility with you before ordering at 05 49 62 03 26.
This kit includes two side covers: a left cover and a right cover, each designed specifically for its side. They are supplied ready to fit and mount using the original screw already present on the bike, with no extra hardware to plan for. You thus replace the two original air box covers with a pair of FCR Original design.
Installation is simple and done with no drilling, by reusing the original hardware. Here are the steps: 1. Unscrew the screw that holds the original cover. 2. Remove the original cover. 3. Position the FCR Original cover and fix it with the original screw. 4. Repeat the operation for the opposite side. The complete assembly instructions accompany the product. The work requires no complex tooling and is done in a few minutes.
These side covers are made of aluminium, with a black finish. Aluminium offers a good compromise between lightness and strength, and forming the sheet allows them to follow the flank of the bike precisely. The openwork that punctuates their surface lightens the part and gives it its character. The careful black finish keeps an impeccable allure over time and dresses the air box area with restraint.
Discover our tips on preparation, maintenance and personalisation for your motorcycle.
The BMW R NineT is arguably the most refined motorcycle customisation base on the market today. This guide covers everything you need to ...
Read article
FCR Accessories: Enhance your BMW with high-end equipment! 🏍️ Optimize the performance, comfort and style of your BMW motorcycle with ...
Read articleThe collection for your motorcycle
All our accessories are imagined, developed and handmade in our FCR Accessories workshop, directly derived from the FCR Original preparation department. As the beating heart of our company, this workshop concentrates all the know-how of our craftsmen and technicians. Each piece is adjusted with precision, designed to combine aesthetics, performance and durability. Nothing is left to chance: from material cutting to final assembly, each step reflects the passion and high standards that have built FCR Accessories' reputation in the high-end motorcycle world.
Designed, manufactured and assembled in Poitiers, France, in our FCR Accessoires workshops, following the finest French craftsmanship standards.
Easy and quick installation, with no cutting or welding required. Each kit includes instructions, mounting hardware and necessary accessories.
Premium materials (stainless steel, aluminium, epoxy-coated steel) and flawless finishes ensure exceptional resistance and longevity.
Every accessory stems from our FCR Original motorcycle expertise - combining performance, design and innovation.
Fast and secure worldwide shipping, with careful packaging and full tracking of your order.
Our team of enthusiasts advises and supports you every step of the way, before and after your purchase.
Parts made with the same precision as our FCR Original motorcycles - created to enhance your machine with authenticity.
Our design and engineering teams develop exclusive accessories that combine style, ergonomics and performance.
