Rear Footrest Guard for BMW R18

Name: Rear Footrest Guard | BMW R18
Brand: FCR Original
SKU: FCR-BM-PRP001-N
Price: 29.00 EUR
Availability: InStock

Rear footrest guard for BMW R18 - Aluminium plate, refined finish, plug and play installation

On the BMW R18, the passenger footrests are one of those areas you barely notice, until the day their original guard gets scratched, dulls or clashes with a motorcycle you have personalised. It is to address this detail that our builders designed this rear footrest guard in our FCR Original workshop.

This part replaces the original passenger footrest guard with an aluminium plate of refined design. Where the standard element remains anonymous, our plate asserts a real signature: taut lines, controlled openwork, careful finish. A small component, but one that contributes to the visual coherence of the entire rear section of the motorcycle.

The choice of aluminium is not incidental. It is a robust material, resistant to wear and to the stresses of the road, which keeps its appearance season after season where a more ordinary original part ends up marking. The guard dresses and enhances the passenger footrest area while ensuring its function, with no compromise between sturdiness and aesthetics.

The part is particularly relevant when the R18 is used in a two-up configuration. It accompanies and enhances the passenger footrest, in a logic of complete finishing of the motorcycle. Sold as a pair, left and right, it treats both sides in a single purchase for a perfectly symmetrical result.

The installation has been designed to remain simple and accessible. It is a plug and play installation: simply remove the original footrest guards and fit ours by reusing the original screws. No cutting, no modification, no additional part to source. A few minutes are enough, and the instructions provided accompany the operation.

Each guard is designed, inspected and packaged in our FCR Original workshop, in Chauvigny. This component was born from our practice of premium building, conceived by our builders with the same care given to our exceptional motorcycles. It is this demand for detail, from the drawing to the parcel, that sets apart a part signed FCR Original.

A question about compatibility with your R18 or about the installation? Our team is at your service at 05 49 62 03 26.

The advantages of the Rear Footrest Guard | BMW R18

A detail that changes the rear section

This plate replaces the original passenger footrest guard with a part of refined design. A small component that asserts a real signature and refines the visual coherence of your R18.

Aluminium built to last

Robust and resistant to wear as well as to the stresses of the road, this aluminium guard keeps its appearance season after season. Sturdiness in the service of aesthetics, with no compromise.

Designed, tested and packaged in our workshop

This part is conceived by our FCR Original builders with the demand of our exceptional motorcycles. From the design to the parcel, everything is controlled in our Chauvigny workshop.

Frequently asked questions about THE Rear Footrest Guard | BMW R18

❯ Why replace the original footrest guards of your motorcycle?

The original footrest guards of a motorcycle are replaced mainly for two reasons: to gain in aesthetics and in material quality. Standard guards are often anonymous parts, designed for their function alone, which get scratched or dulled over time and clash with a personalised motorcycle. Replacing them with a plate of worked design makes it possible to assert a style and to refine the visual coherence of the rear section. In terms of material, an aluminium part offers better resistance over time than a more ordinary original element. It is a discreet but effective personalisation, which addresses a detail often neglected. Our rear footrest guard FCR Original for BMW R18 answers exactly this need.

❯ What is a plug and play installation on a motorcycle?

A plug and play installation refers to a direct fitting of an accessory, with no cutting, drilling or modification of the motorcycle. The part is designed to fix onto the existing mounting points, most often by reusing the original hardware. The advantage is twofold: the installation is quick and accessible, even without advanced mechanical experience, and the fitting remains reversible, which allows a return to the original configuration if desired. It is a guarantee of simplicity and peace of mind, particularly appreciated for aesthetic accessories. Our rear footrest guard FCR Original for BMW R18 is precisely designed according to this principle.

❯ Is this guard compatible with my BMW R18?

Yes, this guard is designed for the entire BMW R18 range: R18 Standard, Classic, B, Transcontinental, Roctane and 100 Years. It replaces the original passenger footrest guards and fixes onto their mounting points. It is not compatible with other BMW families such as the R nineT or the R12, which rely on a different architecture. If you have a doubt about your model year or version, our team checks compatibility with you before ordering at 05 49 62 03 26.

❯ How do these footrest guards install?

The installation is simple and requires no particular tooling. It is done in two steps: Unscrew the original footrest guards. 1. Fit the FCR Original guards by reusing the original screws. 2. No cutting or modification is necessary: it is a plug and play installation. The installation instructions are provided with the product. The operation only takes a few minutes and remains accessible to any rider equipped with basic tools.

❯ Is the guard sold individually or as a pair?

This guard is sold as a pair, left side and right side. You thus treat both passenger footrests of your BMW R18 in a single purchase, for a perfectly symmetrical result. The kit contains the two guards ready to fit; the original hardware of the motorcycle is reused for the installation.

❯ What material and finish is this guard?

This guard is made of aluminium and offered in a black finish. Aluminium was chosen for its robustness and its resistance to wear as well as to the stresses of the road: the part keeps its appearance over time, where a more ordinary original element ends up marking. The black finish ensures a sober and homogeneous integration with the dark elements of the R18.

French craftsmanship and know-how signed by FCR Accessories

The FCR Accessories Workshop

The artisanal heart of our expertise

All our accessories are imagined, developed and handmade in our FCR Accessories workshop, directly derived from the FCR Original preparation department. As the beating heart of our company, this workshop concentrates all the know-how of our craftsmen and technicians. Each piece is adjusted with precision, designed to combine aesthetics, performance and durability. Nothing is left to chance: from material cutting to final assembly, each step reflects the passion and high standards that have built FCR Accessories' reputation in the high-end motorcycle world.

DISCOVER OUR STORY

FAQ - DELIVERY & ORDERING

What are your shipping times?

All our orders are prepared in our workshop in France.

Shipping takes place within 24 to 48 business hours after order confirmation.

What are the delivery times?

France : 2 to 4 working days via Colissimo tracked, Mondial Relay or UPS.

Europe : 3 to 7 business days.

International : 5 to 10 working days depending on the destination.

Do you offer order tracking?

Yes, each customer receives a personalized tracking number by email as soon as the shipment is dispatched.

You can track the delivery of your package in real time.

Which carriers do you use?

We collaborate with premium carriers (Colissimo tracked with or without signature, Mondial Relay, UPS or Fedex depending on destination and customer choice) to guarantee speed and security.

Are your products well protected?

Each order is carefully prepared and shipped in secure and discreet packaging , specially designed to protect your items during transport.

Do you ship internationally?

Yes, we ship our products worldwide. Shipping costs and delivery times vary depending on the destination and are shown when you check out.

Please note that for deliveries outside the European Union (e.g., United Kingdom, Switzerland, United States, Canada), local taxes, customs duties, or brokerage fees may be applied by the authorities or the carrier. These charges are not included in the displayed price and remain the responsibility of the customer.

Please consult our FAQ section or our Terms and Conditions for more information.

Is VAT included in your prices?

Yes, VAT is included for all orders delivered within the European Union.

Business customers can enter their intra-community VAT number when ordering to check if an exemption applies.

For deliveries outside the European Union (e.g., United Kingdom, Switzerland, United States, Canada), local VAT, customs duties, or brokerage fees may be levied upon arrival by the authorities or the carrier. These charges are not included in our prices.

Please consult our FAQ section or our Terms and Conditions for more information.

What payment methods do you accept?

We accept bank cards (Visa, Mastercard, etc.), PayPal, PayPal Express, Paypal x4 (no fees), Alma payment in installments, as well as other secure methods available depending on your country.

Why choose FCR Accessoires

🇫🇷

French manufacturing

Designed, manufactured and assembled in Poitiers, France, in our FCR Accessoires workshops, following the finest French craftsmanship standards.

⚙️

Plug & play installation

Easy and quick installation, with no cutting or welding required. Each kit includes instructions, mounting hardware and necessary accessories.

✅

Quality and durability

Premium materials (stainless steel, aluminium, epoxy-coated steel) and flawless finishes ensure exceptional resistance and longevity.

🏍️

Developed with passion

Every accessory stems from our FCR Original motorcycle expertise - combining performance, design and innovation.

🌍

Worldwide delivery

Fast and secure worldwide shipping, with careful packaging and full tracking of your order.

💬

Passionate customer service

Our team of enthusiasts advises and supports you every step of the way, before and after your purchase.

🛠️

Exclusive expertise

Parts made with the same precision as our FCR Original motorcycles - created to enhance your machine with authenticity.

🎨

Design and innovation

Our design and engineering teams develop exclusive accessories that combine style, ergonomics and performance.

Rear Footrest Guard | BMW R18

Rear footrest guard for BMW R18 - Aluminium plate, refined finish, plug and play installation