Complete Mudguard Kit | Triumph Modern Classic

A complete mudguard kit brings together the front and rear mudguards (or fenders), and often the related parts such as the plate holder, lighting and turn signals. The idea is to transform the whole silhouette at once, rather than part by part.The benefit is twofold: a coherent result, since front and rear are designed together, and time saved at fitment. The bike's look changes radically.The FCR Original complete mudguard kit applies this logic to the Triumph Modern Classic, in a vintage style.

Replacing the front and rear together ensures visual coherence: the same lines, the same finish and the same proportions from one end of the bike to the other. The result is more homogeneous than with mismatched parts.It's also more efficient: a single operation, a single style to validate, a balanced result. The silhouette gains character overall.The FCR Original kit thus brings together front mudguard, rear mudguard and accessories for an all-round transformation.

The kit includes the front mudguard, the rear mudguard with its plate holder and light, plus two front turn signals and their mounting bracelets.Each element is designed to fit the whole, in the spirit of the classic Triumphs. The original hardware is re-used for the mudguards.You get everything to transform the front and rear of the bike in one go, with a coherent result.

This complete mudguard kit is designed for Triumph Modern Classic from 2016, as a replacement for the original mudguards and indicators. The mudguards secure with the original screws. The front turn signals mount on the fork, just above the lower triple clamp, and the wiring follows the manual's diagram. Compatibility depends on your model's configuration. Before ordering, check your model and year; our FCR Accessoires team confirms the eligibility of your Triumph.

The mudguards are made from brushed aluminium, a material that combines lightness, strength and a refined finish. It lasts well over time and protects from spray. The front mudguard measures around 110 mm wide by 390 mm long, the rear around 140 mm by 600 mm. Proportions designed to follow the bike's lines. Brushed aluminium gives that clean, vintage look while staying resistant to riding conditions.

The front and rear mudguards secure with the original screws, with no heavy modification. The front turn signals mount on the fork using the supplied bracelets, just above the lower triple clamp. The electrical wiring follows the manual's diagrams, which detail the wire matches for the front and rear turn signals, the plate light and the rear light. Each wire is identified by colour. If in doubt, our FCR Accessoires team can assist, and fitting is possible at our workshop by appointment.