The M-Shock rear shock absorber for BMW R nineT (2013-2020) was developed to address the limitations of the standard suspension and deliver a tangible improvement in road behaviour. It is aimed at riders looking for a better balance between comfort, stability and riding precision, whether in daily use or more committed riding.
Its adjustment system is built around a single dial acting simultaneously on compression and rebound across 48 positions. This synchronisation of both hydraulic parameters ensures a consistent balance regardless of the chosen setting, without upsetting the overall behaviour of the motorcycle. Adjustment is quick, accessible and requires no specific tooling.
The progressive hydraulics absorb road surface irregularities effectively while maintaining a firm response under heavier compression loads - notably during hard braking or aggressive cornering. The rear wheel maintains better contact with the road surface, directly improving traction, line-holding and overall feedback to the rider.
On the BMW R nineT, this translates into better weight transfer management, increased stability through corners and a more composed overall feel. Long-distance fatigue is noticeably reduced, and the motorcycle gains consistency of behaviour regardless of speed or road surface.
Every shock absorber is individually tested on a Roehrig dyno before dispatch, ensuring a compliant performance curve and consistent output over time. Fitting is a direct replacement for the standard unit, with no structural modification to the motorcycle required.
Spring colour:
Solo use, rider and equipment up to 120 kg: black or red spring
Solo use, rider and equipment over 120 kg / two-up riding: red spring required
Need advice on the right configuration or spring rate for your setup? The FCR Accessoires team is available by phone or email.
Each order is prepared with the utmost care in our workshop in France.
Shipping within 24/48 working hours, with secure packaging to protect your parts.
Delivery France 🇫🇷: 2 to 4 working days via premium carriers (Colissimo, Mondial Relay, Fedex or UPS).
Delivery Europe & International 🌎: 3 to 7 working days with real-time tracking.
A personalized tracking email is sent to you as soon as your order is shipped.
Choose options
A single dial acts simultaneously on both hydraulic parameters across 48 positions. The calibration remains consistent at every setting, with no imbalance between compression and rebound, allowing quick adaptation to any riding style.
The progressive hydraulics maintain rear wheel contact in demanding situations. The motorcycle gains stability through corners, better feedback under braking and improved comfort on degraded road surfaces.
Every shock absorber is tested before dispatch, with its performance curve verified and confirmed against specification. Two-year warranty, unlimited mileage.
Video
Before / After
Each FCR Accessoires creation brings a touch of character and exclusivity to your BMW R nineT .
A refined design, noble materials and 100% French manufacturing.
Before
After
Compatible with: BMW R nineT (2013-2020), BMW R nineT Pure (2014-2020), BMW R nineT Racer (2014-2020)
Installation without modification: Parts designed to fit your original motorcycle model.
Complete delivery: Detailed installation manual and mounting hardware included.
Yes. The M-Shock is compatible with the BMW R nineT Pure (2014-2020), the standard R nineT (2013-2020) and the R nineT Racer (2014-2020). It fits as a direct replacement with no modifications to the frame or mounting points.
Both versions share the same technical foundation: progressive hydraulics, synchronised compression and rebound adjustment across 48 clicks, individual Roehrig dyno testing. The M-Shock 2 features an evolution of the internal hydraulics for a more refined response. If you are unsure which version suits your riding style, the FCR Accessoires team can advise.
The standard shock absorber is calibrated for general-purpose use and shows its limits on demanding roads, under load or during dynamic riding: imprecise cornering, poorly controlled rebound, insufficient comfort on rough surfaces. An aftermarket shock absorber allows the motorcycle's behaviour to be tailored to real-world use and the rider's weight profile.
Spring selection depends on total loaded weight. For solo riding with rider and gear not exceeding 120 kg, the black or red spring is suitable. Above 120 kg or for two-up riding, the red spring is required to maintain consistent and safe damping.
No. The M-Shock fits as a direct replacement for the standard unit. No modifications to the frame, mounting points or motorcycle are required. Fitting is reversible. Professional installation is recommended for initial setup and adjustment.
The M-Shock carries a 2-year warranty with no mileage limit. Every unit is individually tested on a Roehrig dyno before dispatch. For any questions on adjustment or compatibility, the FCR Accessoires team provides direct technical support by phone or email.
Discover our tips on preparation, maintenance and personalisation for your motorcycle.
FCR Accessories: Enhance your BMW with high-end equipment! 🏍️ Optimize the performance, comfort and style of your BMW motorcycle with ...
Read article
Discover our BMW customization guide: R NineT, T NINE T Scrambler, R18 and R12. Premium FCR accessories for a unique café racer style.
Read articleThe collection for your motorcycle
All our accessories are imagined, developed and handmade in our FCR Accessories workshop, directly derived from the FCR Original preparation department. As the beating heart of our company, this workshop concentrates all the know-how of our craftsmen and technicians. Each piece is adjusted with precision, designed to combine aesthetics, performance and durability. Nothing is left to chance: from material cutting to final assembly, each step reflects the passion and high standards that have built FCR Accessories' reputation in the high-end motorcycle world.
Designed, manufactured and assembled in Poitiers, France, in our FCR Accessoires workshops, following the finest French craftsmanship standards.
Easy and quick installation, with no cutting or welding required. Each kit includes instructions, mounting hardware and necessary accessories.
Premium materials (stainless steel, aluminium, epoxy-coated steel) and flawless finishes ensure exceptional resistance and longevity.
Every accessory stems from our FCR Original motorcycle expertise - combining performance, design and innovation.
Fast and secure worldwide shipping, with careful packaging and full tracking of your order.
Our team of enthusiasts advises and supports you every step of the way, before and after your purchase.
Parts made with the same precision as our FCR Original motorcycles - created to enhance your machine with authenticity.
Our design and engineering teams develop exclusive accessories that combine style, ergonomics and performance.
